Before You Replace the Lot, You Might Only Need a $155 Repair
Fixed-price spouting repairs in Dunedin, $155 to $625
Often it's one failed joint or one downpipe causing the trouble. We replace that part and leave the rest of your spouting alone.
The most common spouting repairs in Dunedin
Downpipes overflowing at the top and running down the wall
Downpipes still dripping days after the rain has stopped
Downpipes pulled loose and hanging off the wall
Spouting sagging between brackets or pulling away from the fascia
A steady drip at a corner, or where two lengths join
Holes, cracks or splits in older plastic spouting
Not sure what's gone wrong? Give us a call today for a free, no-obligation quote.
Straight answers to three things Dunedin asks us
What's this actually going to cost me?
Common gutter repairs cost around $155 to $445, depending on which part has failed and how hard it is to reach. You'll have a fixed price in writing before anyone sets foot on a ladder, and we don't change it without talking it through with you first.
Read on to see the most common spouting repairs and what they cost.
Do I need a repair, or does my whole house need to be replaced?
Most of the time, what looks like a broken gutter is really just an overdue clean. We'll tell you which one yours is, even when the answer is the cheaper job. A full re-spout typically runs $3,000 to $6,500, and most homes don't need one.
Can you fix mine? I heard they stopped making it
More often than not, yes. A repair takes out the failed length and puts a new one in, so what matters is whether your profile is still made, not whether the rest of your spouting is any good. If yours genuinely is discontinued, we'll say so and go through your options, rather than quietly selling you a full re-spout.
.jpg)
Common Spouting Repairs & Starting Prices
Tap the repair that looks closest to what’s going on with your gutters, and we’ll take it from there. Not sure what the problem is? No worries, pick the closest option and we’ll figure it out for you.
.jpg)
.jpg)
.jpg)
Common signs and what they usually mean
Leaking downpipes, days after the rain has stopped
That's water sitting in your spouting with no way out. The tell is a dry day: still dripping when it hasn't rained since yesterday means water lying up there with nowhere to go, and that points to a blockage rather than a broken gutter.
Where there's mature sycamore, plane or oak over the eaves, the downpipe is the narrowest part of the system and it's the first place that debris packs. Often a clean sorts it and there's no repair at all. Now and then it isn't a blockage: the pipe is undersized for the roof area and can't shift heavy flow. That's how the place was built rather than anything you've done.
What a leaking downpipe can cost
Just a blockage: a clean clears it and you're done. No repair.
Undersized downpipe: if the pipe is genuinely undersized for the roof area, going up to an 80mm downpipe is $240 to $390, depending on height and access. That's a capacity question, not a blockage fix, and we'll tell you which one yours is.
Green growth where two lengths join
Algae or moss around a join is the giveaway. Spouting expands and contracts with every temperature swing, and that movement eventually works the seal inside loose. Water weeps through the seam and keeps the outside damp, which is all algae and moss need to take hold. Anywhere that stays shaded and damp it shows up sooner, and well before you'd ever catch it dripping.
Good news is it's one of the easier ones to sort. Once one of those has let go it doesn't get resealed, it gets replaced. We swap the failed fitting for an expansion joiner, built to let the two lengths slide as the temperature moves instead of straining the seal. You're paying for the joiner, not the run.
What a leaking spouting joint can cost
Joiner replacements start at $155, materials and labour included, depending on access and the type of spouting.
.jpg)
It sags in the middle and pours over the side in heavy rain
Usually it's weight. Leaves and silt build up, water can't get out, and a length full of wet muck is heavy enough to pull the middle off its brackets.
Two things make that happen faster around Dunedin. Tree load is the first: on the hillside streets with mature deciduous overhang the spouting refills sooner after a clean, so the brackets spend more of the year carrying weight. The second is the slope. On a steep section water arrives at the spouting with more energy behind it, and every bracket, joiner and outlet takes that.
It's not always weight though. Years of wind and movement work the original fixings loose. And if the board behind the spouting has gone soft already, new screws won't hold it up.
What sagging spouting can cost
Blocked but still straight: you just need a clean. Cleared out, draining again, no repair.
Already sagging: the length is bent and won't sit straight again, so new brackets are a waste. Section replacements run $270 to $625, depending on how far gone it is.
How our Gutter repair quotes work
2
Get a fixed price back, usually the same day. Most repairs we can price without a site visit. If it turns out your spouting only needs a clean, we'll tell you that and quote the spouting clean instead.
3
We fix it, and you get photos of the finished repair with your invoice.
1
Give us a call, or start a quote online. The form takes your name, number and address, and that's all we need to get going. Got a photo of the problem? Send it through, and it speeds things up, but it's not essential.
